The Earth Collection

The Earth Collection coatings are high-end decoration finishes that enhance the beauty and timelessness of the natural effects of lime. They meet the highest standards of sustainability, presenting excellent environmental and health benefits. Thanks to their formula based on 100% artisanal lime, the products absorb CO2* and have excellent breathability. Made with Graphenstone Technology for greater resistance and durability.

Discover our selection of colours and textures inspired by the Earth.

*The CO2 absorption occurs during the first 28-30 days after applying the product.

SELECT

Siena

Mineral limewash paint
For further information, contact info@graphenstone.com

Mineral paint especially ideal for creating a limewash effect on interior surfaces. Intended for high decoration that seeks the timeless beauty of lime effects, slightly marking the waters and chiaroscuros with a natural matte finish, easy to apply. Thanks to it´s formula, the product absorbs CO2 and has an excellent breathability that prevents condensation. With Graphenstone Technology for greater resistance and durability.

	10-12m²/L per coat (depends on substrate)			Limewash application: Mitt, glove, sponge or masonry brush. Brick whitewash patina: Roller, brush, masonry brush or airless masonry brush. Brick whitewash patina: Roller, brush, masonry brush or airless
	Aerated lime			Washable Class 1 Wet scrub
	2-4h - between coats 24h - for full drying 30 days - Curing

SELECT

Venetta

Highly decorative natural venetian plaster
For further information, contact info@graphenstone.com

Highly decorative natural coating for Venetian stucco finishes. Thanks to its formula based on artisanal lime, the product absorbs CO2 and has excellent breathability, preventing condensation. With Graphenstone technology for greater strength and durability.

	8-10m²/L per coat (depends on substrate)			- Stucco trowel. For matt finish: Fine sandpaper. For glossy finish: Japanese trowel or electric polisher.
	Water based aerated lime			Washable Class 1 Wet scrub
	30m - between coats 24h - for full drying 30 days - Curing

SELECT

BeeWax

Natural wax protector
For further information, contact info@graphenstone.com

Natural wax for the protection of stuccos and mortars. It protects colours and prevents the absorption of water and its pollutants without altering the permeability of the substrate to gases or water vapor.

	30-40 m²/l (depends on substrate)			Sponge, trowel or short-haired glove. Woollen mop (polishing)
	Natural wax			24h - for full drying

SELECT

Firenzza

Natural lime mortar
For further information, contact info@graphenstone.com

Bi-component aerated lime mortar with Graphenstone technology. Continuous coating with a natural matt finish, with lime-like effects, ideal for creating highly decorative textures. Each texture has a specific technique according to The Textures of the Earth. Highly breathable. For use in building, restoration of historic buildings and high decoration.

	5 kg/m² (4-5 mm thickness) on level substrate			Preparation: Mechanical mixer, bucket. Application: Trowel. Finishing: According to texture.
	Areated lime putty			24h - between coats 4 days - for full drying

SELECT

Modena

Natural lime mortar with superfine finish
For further information, contact info@graphenstone.com

Bi-component aerated lime mortar with Graphenstone technology. Continuous coating with a superfine finish, natural matt and with lime effects for vertical and horizontal surfaces. Highly breathable. For application in construction, restoration of historic buildings and high decoration.

	4.5 kg/m² (2-3 mm thickness) on level substrate			Preparation: Mechanical mixer, bucket. Application: Trowel. Finishing: trowel.
	Areated lime putty			24h - between coats 4 days - for full drying

SELECT

Contak

Bonding primer for mortars

Acrylic bonding primer that acts as an adhesion bridge and provides mechanical and provides a mechanical anchorage to plaster mortars and surface mortars and adhesives on smooth surfaces.

	8-12 m²/l (depends on substrate)			Brush or roller applied
	Acrylic emulsion			24h - for full drying

SELECT

NaturGlue

Adhesive lime mortar

Two-component air lime paste adhesive mortar with Graphenstone technology. Highly breathable, highly flexible. Recommended as a previous coat to ensure adhesion and workability of finishing mortars, and for bonding ceramic tiles. Can also be used as a repair mortar for the rehabilitation and restoration of historic buildings.

	3 kg/m² (2-3 mm) as a previous coat for bonding of finishing mortar. 5 kg/m² (thickness of 5 mm) on level substrate.			Preparation: mechanical stirrer, bucket. Application: trowel, notched trowel. Finishing: brush, finishing trowel.
	Aerial lime in paste			24h - between layers of mortar 7 days - for full drying 30 days - Curing